Daewoo DDW-G1213E, Service Manual

Page: 13 / 29

Dishwasher
Edition: 2011-12 Model: DDW-G1213E
11
Amount of rinse-aid set too high.
6 Maintenances Services and Trouble Shooting
6.1 maintenances services
With the aid of the following guide, minor problems can be easily corrected
without calling for the assistance, saving you both time and money.
Before Calling for Service
Reviewing the charts on the following pages may make you be free of calling for
service.
Problem Possible Causes What To Do
Fuse blown, or the
circuit breaker acted
Replace fuse or reset circuit breaker.
Remove any other
appliances sharing the same circuit
with the dishwasher.
Power supply is not
turned on
Make sure the dishwasher is turned
on and the door is
closed securely. Make sure the
power cord is properly plugged into
the wall socket.
Dishwasher
doesn’t run
Water pressure is low
Check that the water supply is
connected properly and
the water is turned on.
Drain pump
doesn’t stop
Overflow
The system is designed to detect an
overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump.
Some audible sounds are
normal
Sound from detergent cup opening.
Utensils are not secure in
the baskets or something
small has dropped into the
basket
To ensure everything is secured in
the dishwasher.
Noise
Motor hums
Dishwasher has not been used
regularly. If you do not use it
often, remember to set it to fill and
pump out every week,
which will help keep the seal moist
.