11
•
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and current
settings are correct for the battery pack being charged.
•
Charge batteries on a fi reproof surface and away from fl ammable items or liquids.
•
Batteries should NEVER be left unattended while charging. Only adults should charge
the batteries.
•
Follow the manufacturer’s instructions for charging the product and do not charge
longer than recommended. Unplug the charger when the battery is charged or not
in use.
•
A warning that batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fi re or the like.
NOTE:
The speakerphone is not magnetically shielded and may cause color distortion on the
screen of some TVs or video monitors. To avoid this, you may need to move the unit further
away from the TV or monitor if an unnatural color shifts or image distortion occurs.
TURNING THE DBT-02 POWER ON/OFF
1. Slide the ON/OFF button to the ON position until a beep sound is heard to turn the unit
ON, the Indicator LED will fl ash blue 3 times and automatically enter to pairing mode.
The LED fl ash blue and red alternatively to wait for Bluetooth device to pair it.
2. To turn the unit OFF, just slide the ON/OFF button to the OFF position. Don’t forget to
turn off the Bluetooth feature on your cell phone.
SPEAKERPHONEPHONE OPERATIONS
PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER BLUETOOTH
ENABLED DEVICE TO THE DBT-02
1. If the DBT-02 has never been paired with a Bluetooth device before. You need to follow the
pairing instructions below to link the DBT-02 with your Bluetooth device.
• Slide the ON/OFF button to the ON position until a beep sound is heard to turn the unit
ON, the Indicator LED will fl ash blue 3 times and automatically enter to pairing mode.
The LED fl ash blue and red alternatively.
• The speakerphone is ready to pair (link) with your Bluetooth device.
• Turn on the Bluetooth function of your cell phone and enable the search or scan function
to fi nd the DBT-02.
• Select “DBT-02” from the device list when it appears on your device screen. If required,
enter the pass code “0000” to pair (link) the DBT-02 with your mobile phone or Bluetooth
device.
2. After turning on the DBT-02, the unit will search for the last paired device. The LED
INDICATOR will fl ash rapidly in blue. If the unit fi nds the paired Bluetooth device, a beep is
heard and the LED INDICATOR will begin fl ashing at a slower rate.
Remarks:
• Fast fl ashing is when the LED lights up 3 times every second.
• Slow fl ashing is when the LED lights up 1 time every 8 seconds.
3. After successfully pairing (linking), you can begin playing music from your Bluetooth device
wirelessly to the speakerphone.
ENG
