background image

Manufactured under license of 

Daewoo International Corporation

, Korea

www.daewoopowerproducts.com

USER'S MANUAL

DAVC 

90-20L/40L

Vacuum cleaner

1. PRODUCT CHARACTERISTICS

(1) Vacuum cleaner for wet and dry
(2) Jacks on the base, easy for depositing accessories
(3) Blowing function, satisfy different requirements

2. PARTS NAME

 

 

Hose assembly                            

 

 

 

 

 Tubes

Floor brusch   

 

 Crevice nozzle 

 

 

Filter bag 

 

     Round brush

Use the right accessories according to different situations.
Bristle for bookshelves, windows and bibulous brush for floor and carpet, tables, etc.

Crevice nozzle for crevice, corner, etc. Blowing mouth for blowing the dust away
in the crevice of the machine

3. SAFETY INSTRUCTIONS

(1) Check before operation that the local power supply is the same as the
specification on the rating label.
(2) Do not use machine in the combustible and explosive place in case the motor spark causes fire. 

(3) Do not jam the air inlet mouth, in case temperature rises and damaging the motor.

(4) Do not collect combustible and explosive objects such as glowing cigarette, gasoline, etc. 

*Do not collect sharp objects.
*Do not collect objects which can easily attach on the filter such as calcareousness powder, gesso 
and graphite powder. Because those will block the ventilation damage motor.

(5) Do not overturn the machine in case water goes into the motor and damages the motor.

(6) Warning:  If water is out from air outlet mouth, do not overturn the machine when being repaired in 
case water goes into the motor and causes damage. Do not use this machine as pump in case of 
damaging the motor.
(7) Turn off the machine and remove the plug each time after using or when being repaired.
(8) Keep machine away from strong sunlight and high temperature place in case plastic is distorted.

(9) Do not wrest, tramp, or haul hose in case of making it damaged.
(10) Do not immerse the barrel cap into the water or wash with water in case water goes into the 
electrophorus parts and causing person injured 
The correct way should be: immerse the dishcloth firstly, and then dry it. Finally, wipe the dirty part 
gently.
(11) The power cord must be replaced by the designated repairing center or professionals.

4. OPERATION METHOD

(1) Connection
Insert the hose connector into the air inlet mouth, as shown in the picture; make sure the connector is 
tightly fastened.

Press the connector button as shown in the picture, and pull the connector out when you want to pull 

hose connector from machine.

Insert hose connector into the blowing mouth as shown in the picture when you want to use its 
blowing function.

As shown in the picture, connect all the accessories for wet & dry cleaning.

(2) Operation
1. Insert the plug into the supply socket.

2. Press switch button, the machine     3.You can adjust the airflow by pushing the begins to work.   
 

 

 

 

 

        sliding block up and down.

5. PROTECTIVE DEVICE

Special instruction concerning protective device.
(1) When the water in the barrel is full, the device begins to work.
The suction power will vanish at this moment. The machine will make some noise which indicates the 
motor is running at a high speed.
Under this circumstance, you should cut off the electricity, and clean out the water. Then equip the 
machine and turn it on, it will begin to work normally.
(2) When the machine was overturned, the device will become to work. You should
cut off the electricity and make it upright, then turn on the machine.
(3) When the device is working, the motor will be damaged and cause fire if you use 
the machine. Under this circumstance, you should stop using and clean out the water, then you can 
begin to use it.

6. MAINTENANCE

(1) Barrel Cleaning
* After working or when the barrel is full of dust which causes suction decrease considerably, you 
should cut off the electricity and clean the dust away from the barrel.
1) Unfasten the locking knob, lift up the top cover.
2) Take off the filter bag, clean the dust away in the dust barrel.
3) Install the filter bag back and place the top cover.
(2) Filter bag cleaning
* Filter bag should be washed by clean and warm water when it is covered with dust. If necessary, you 
can use litmus less scour to wash.
1) Take off the filter
2) Wash
3) Dry

7. TECH DATA

DAVC90-20L

Power: 1200 W
Airflow rate: 

1.5 min/m³

Vacuity: 

18 kPa

Noise: 

78 dB

Cable length: 4.5 m
Tank capacity: 20 L
N.W./G.W.: 5.3 kg / 6.2 kg
Size: 36 x 35.6 x 51 cm
Accessories: 1.5 m hose assembly/ plastic tubes/ round brush/ floor brush/ crevice nozzle/ fabric 
filter/ sponge filter
Features:
Wet and dry function;
Blowing function;
Accessories storage function;
Waterproof power switch;
Universal wheels

DAVC90-40L

Power: 1200 W
Airflow rate: 

1.5 min/m³

Vacuity: 

18 kPa

Noise: 

78 dB

Cable length: 4.5 m
Tank capacity: 40 L
N.W./G.W.: 6.5/7.8 kg
Size: 36 x 35.6 x 78.2 cm
Accessories: 1.5 m hose assembly/ plastic tubes/ round brush/ floor brush/ crevice nozzle/ fabric 
filter/ sponge filter
Features:
Wet and dry function;
Blowing function;
Accessories storage function;
Waterproof power switch;
Universal wheels

Summary of Contents for DAVC 90-20L












Reviews: