Vehicle Systems
Disassembly & Assembly
9.
Install cap (13) and two screws (12).
10.
Install O-ring (9), poppet (10) and spring (11) to
lift section assembly (6).
11.
Install O-ring (8) and plug (7) to the lift section
assembly.
12.
Install piston (41), spring (42), spring seats (39
and 40) and spring (38) on the tilt spool assembly.
13.
Compress the spring with spool end (37).
Torque the spool end to
8 ~ 11 N¥m (70 ~ 97 lb¥in)
.
NOTE :
Do step 6, 7, 9 and 10 to assemble the tilt
spool to the tilt section assembly.
NOTE :
Do same steps to assemble the side shift
section and fourth section assembly.
14.
Assemble all the sections on the studs.
15.
Install the nuts (1) that hold the valve sections
together.
Tighten the single top nut to torque of
100 N¥m
(885 lb¥in)
and two bottom nuts to torque of
65 N¥m (575 lb¥in)
.
End By :
a.
Install hydraulic control valve.
32
IACD226P
IACD227P
7
6
9
11
10
8
13
12
IACD235P
41
42
37
39
38
40
IACD223P
1