Operating Instructions
• Clip the fan into the desired position, note that the clip can clipped
onto surface edges with a thickness up to 3cm.
• Ensure that the speed control switch on the rear of the motor is in the
‘0’ off position.
• Slacken the Pivot Screw to enable the fan to tilt vertically up and
down and tighten the pivot screw once in the desired position, rotate
the fan from left to right to the desired position. NB do not adjust the
fan whilst connected to the mains.
• Insert the mains plug into the nearest socket.
• Move the speed control switch to either the ‘1’ position for the low
speed or the ‘2’ position for the high speed. Return the switch to the
‘0’ off position to switch off the fan.
Care and Use of your Clip Fan
• Ensure that the clip fan is not connected to the mains supply before
cleaning.
• Wipe the fan body clean with a clean, soft damp cloth.
• Do not immerse the fan or its cord in water or any other liquid.
Technical Data
Voltage : 220-240V
AC
50Hz
Rated
power
: 15W
Model
: COL1112
