Operate your fan using the following steps
:
• Place the fan in the desired position and ensure that it is vertical and
stable.
• If desired, the fan guard can be tilted up and down to alter the direc-
tion of the airflow. To do this, slacken the Large Pivot Knob (7) and
the Small Adjustment Knob (19). Set the position of the guard and
then tighten the two knobs (7 & 19)
• NB do not adjust the fan whilst connected to the mains.
• Height adjustment: Before adjusting the height, hold the fan motor
housing to prevent it dropping down.
• Loosen the height locking screw and raise or lower the height of the
fan to the desired position, tighten the screw after setting the height.
• NB do not adjust the fan whilst connected to the mains.
•
To operate the fan, ensure that the on/off/speed control (10) is in the
‘0’ position.
• Insert the mains plug into the nearest socket.
•
Rotate the on/off/speed control switch (10) as follows:
• I for the low speed,
• II for the medium speed
• III for the high speed.
•
Return the control to the 0 position to switch the fan off
Making Your Fan Oscillate From Side To Side
Press the oscillation control (11) down to enable the fan to oscillate from
side to side.
Pull the control up to stop the fan oscillating.
Care and Use of your Fan
• Ensure that the fan is not connected to the mains supply before
cleaning.
• Wipe the fan body clean with a clean, soft damp cloth.
• Do not immerse the fan or its cord in water or any other liquid.
16 Inch Chrome Pedestal Fan
COL1073
User Manual
Summary of Contents for COL1073
Page 1: ......
