Daewoo CMC-518X, Service Manual

Page: 12 / 61

(k) Select 6550
¡£
K on the OSD Menu and set the color coordinates in X=0.313, Y=0.329 at the maximum
contrast control and center brightness control.
(l) Check if the a full white pattern is over 30Ft/L. If you satisfied with the result, readjust the internal sub contrast
VR.
6. Static Convergence Adjustment
(a) Apply a magenta cross hatch pattern on display
(b) Adjust the focus from the best over all focus on the display.
Also adjust the brightness to the desired condition
(c) Vertical red and blue lines are converged by varying the angle between the two tabs of the 4-pole magnets.
(d) Horizontal red and blue lines are converged by varing the tabs together, keeping the angle between them
constant.
(e) Apply a white cross hatch pattern on display.
(f) Vertical green and magenta lines are converged by varing the the angle between the two tabs of the 6-pole
magnets.
(g) Horizontal green and magenta lines are converged by varing the tabs together, keeping the angle between them
constant.
10