DAEWOO ELECTRONICS KOR-63B50P, Service Manual

Page: 7 / 24

1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven
door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Close the door securely.
4. Choose cooking power level by setting V.P.C knob to the
desired position. Refer to cookbook for recommended
power levels.
5. Determine cooking time.
Consult cookbook for recipe timing.
Oven light turns on and cooling fan starts to operate.
Microwave cooking starts.
6. You may open the door while the oven is operating.
As soon as the door is opened, the safety mechanims
stop the generation of microwave power and the operation
of cooking timer.
If you wish to change the time during cooking, simply adjust
the timer to the desired time.
7. When the timer reaches zero, a bell will ring and the unit will turn off.
Oven light turns off. If additional cooking time is needed and the
door is closed, the oven will automatically start when the timer is reset.
Variable power cooking
On and OFF cycle time of mechanical V.P.C switch is 30 seconds.
When the V.P.C knob is set to the desired position and timer knob turns to the desired position, the V.P.C switch has a cycle
(ON/OFF time(sec.)) listed below.
Variable power setting
O N/OFF tim e (sec.)
Approxim ate Percentage
of Power
Power level
Sym bol
KOR-6305 KOR-8605
H IG H M A X M A X 30/0 1 00 %
M E D H IG H 610W 690W 23.2/6.8 77 %
M ED IU M 440W 490W 16.5/13.5 55 %
D E FR O S T 260W 290W 9.8/20.2 33 %
W A RM 130W 150W 5/25 17 %
OPERATIONS AND FUNCTIONS
NOTE
1. When setting timer for less than 2 minutes, turn the
timer past 2 minutes and then return to the correct
timer setting.
2. Various clicking noises may be heard when turning
V.P.C knob. This is normal and does not affect the
operation of your microwave oven.
Make sure the oven is properly installed and plugged into the electrical outlet.