DAEWOO ELECTRONICS DWF-7570DP, Service Manual, Page: 7 / 42

AUTOMATIC DRAINING TIME ADJUSTMENT
This system adjusts the draining time automatically according to the draining condition.
Draining
condition
Good draining
Bad draining
No draining
FUNCTIONAL PRINCIPLE
Drain Time
Less than
10 minutes
More than
10 minutes
Continue draining.
Total drain time = D + 60
(T sec.) Residual drain time.
The time remembered by micom.
The washer begins spin process after drainage.
Draining time is prolonged.
Program is stopped and gives the alarm.
1) The micom can remember the time from the beginning of drain to reset point when the pressure switc
reaches to "OFF" point.
Movement of the program
Program is stopped and gives the alarm with the
display lamp.
2) In case of continuous draining, residual drain time is determined by micom.
blinked on
D
R
A
I
N
I
N
G
T
I
M
E
t
D1
TRIP POINTS
x
E. LOW
LOW MID
HIGH
T1 = D 1 + 60 (Sec.) T2 = D2 + 60 (Sec.) T3 = D3 + 60 (Sec.) T4 = D4 + 60 (Sec.)
W
A
T
E
R
L
E
V
E
L