10
SYSTEM SET-UP
System setup menu allows us to set OSD Language, TV
System, Region and Time, Timer Setting, OSD Setting and
Parental Lock.
!
Press the "MENU" button
to enter the main menu,
select "Setup" and press the "OK" button
to enter
system setup menu.
@
Press the "UP" or "DOWN" cursor button
to highlight
the desired menu and press the "OK" button
to
enter the setting menus.
Then press the "UP" or "DOWN" cursor button
to
select the desired item, press the "LEFT" or "RIGHT"
cursor button
to change the setting.
#
Press the "EXIT" button
to exit.
System setup menu
This menu allows you to set the OSD Language.
OSD Language :
To select your desired OSD language.
OSD Language
This menu allows us to set the Aspect Ratio, Video Output
and LCN Mode.
Aspect Ratio :
Aspect Mode is used for switching the
screen aspect ratio mode.
4:3 PS
4:3 Pan Scan
4:3 LB
4:3 Letter Box
16:9
16:9 Wide Screen
Video Output :
Video Output is use for switching the
video output mode.
RGB
Set to RGB (Red, Green, Blue)
CVBS
Set video output signal to CVBS
(Composite Video Blanking Sync)
LCN Mode :
If LCN (Logical Channel Number) Select
function is activated, You can't change the original
number of TV channels by scanning.
You can activate/deactivate the LCN function by setting
the "LCN Mode" to on/off.
TV System
DSD-800M_UK_2007 2007.10.2 5:54 PM ˘
` 10 mac001 1200DPI 90LPI
