7
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363. If the plug
has to be removed, it should be cut off and carefully disposed of
immediately. To avoid a possible shock hazard, do not insert the discarded
plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be
connected as shown below. The wires in the mains lead fitted to this
appliance are coloured in accordance with the following code:
Brown wire = Live (L)
Blue wire = Neutral (N)
Green & Yellow = Earth (E)
If colours of the wires in the mains lead of this appliance do not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Blue must be connected to the terminal which is
marked with the letter N or coloured Black. The wire which is coloured
Brown must be connected to the terminal which is marked with the letter L
or coloured Red. The wire which is coloured Green and Yellow must be
connected to the terminal which is marked with the letter E or coloured
Green.
Before refitting the plug cover check that there are no cut or stray strands
of wire inside the plug. Use a 13 Amp BS 1362 fuse, only BSI or ASTA
Connect
Green &
Yellow to
Earth (E
)
Connect
Brown to
Live (L)
Connect
Blue to
Neutral
(N)
Ensure the outer sheath of the
mains lead is securely held by the
cable clamp
Summary of Contents for SDA Series
Page 1: ...1...
