8
ADK-7330
Getting started
▶
Setting the sound
▶
Turn on/off the unit
2
Press Power/Volume(ON-OFF/VOL) to turn
on the unit.
- If the source is ready, playback also starts.
- If you turn off the power while listening to a disc,
disc play will start from where playback has been
stopped previously.
- By pressing AM/FM, you can also turn on the radio
directly.
- If you turned off the power while listening to the
radio, the same radio station will be selected.
3
Press and hold Power/Volume(ON-OFF/VOL)
to turn off the unit.
- If you turned off the power while listening to a disc
or tape, disc or tape play will start from where
playback was stopped previously.
- If you turned off the power while listening to the
radio, the same radio station will be selected.
1
Press SOUND repeatedly to select sound
setting mode.
◆
You can adjust the bass, middle, treble, fader, balance, equalizer and
volume level.
1
Turn your car’s ignition key to ACC or ON
position.
The clock is displayed.
2
Rotate Power/Volume(ON-OFF/VOL) to
adjust each level or balance.
- BAS(Bass): adjust the bass sound level (-5 to +5).
- MID(Middle): adjust the middle sound level (-5 to +5).
- TRE (Treble): adjust the treble sound level (-5 to +5).
- FAD (Fader): adjust the sound fade between the front and
rear speakers (F15 to R15).
- BAL (Balance): adjust the sound balance between the right
and left speakers (L15 to R15).
- EQ (Equalizer): select an equalizer effect (EQ OFF,
CLASSIC, DANCE, ROCK, JAZZ, POP, VOICE,
TECHNO).
To cancel the equalizing effect, select “EQ OFF”.
- VOL (Volume): adjust the volume level (0 to 41).
