CAUTION
Connections
1. To control camera, all camera’s (which are connected to TDM08-SDI-TX) ID (CAM ID or
RS485 ID) must not be overlapped.
2. EX-SDI 1.0 is not supported. (support HD-SDI and EX-SDI 2.0)
3. Please refer the DVR’s manual for DVR’s TDM configuration and usage.
4. Transmission distance of COAX (MUX OUT) is the same with HD-SDI’s transmission distance.
(max. 180m)
5. TDM08-SDI-TX is not compatible with MUX08-SDI-RX.
Optic Cable
1. Do not bend the connector portion less than 30mm (minimum acceptable
refraction range).
2. Do not pull the cables from both sides.
3. Do not spin the device while the cable is connected.
4. Do not tie the cables.
COAX Cable
Please use COAX cable and BNC connector having impedance 75 Ω.
The max transmission distance of HD-SDI/EX-SDI 2.0 depends on the cable specification and
installation environments.
Cable Type
Between
Video Format
Transmission Distance
5C-HFB(T)
Camera↔TDM08
HD-SDI
PoC Camera: 180m
NonPoC Camera: 180m
EX-SDI 2.0
PoC Camera: > 180m
(different according to power
consumption of camera)
NonPoC Camera: 700m
TDM08↔DVR
EX-SDI TDM
180m
* Transmission distance can be varied depending on the decay rate of 750MHz. (dB/100m <
25dB attenuation is recommended.)
* Formed or high formed insulator cable is recommended.
* Double or triple shield cable is recommended.