background image

GENERAL SAFETY

WARNING

1. Do not run the engine for a long time in closed or not well-ventilated area because the exhaust gas contains toxic sub-

stances such as carbon monoxide, hydrocarbon, nitric oxide.

2. The battery fluid(lean sulfuric acid) is extremely toxic. It is dangerous if skin is exposed to it or if it enters into the

eye. Be careful in handling. When exposed to the battery fluid, wash it with water and get a medical check up.(store
the battery fluid in a safe place to avoid touching by the children)

3. Pay attention not to be burned and always put on the protection gears because the engine or the muffler is hot right

after engine stops.

4. Gasoline is extremely flammable. Maintenance must performed in the place free of the open fire or electric spark.
5. When more than two person are working, always pay attention to other worker’s action and alway have safety in

mind.

6. The skin exposed to used engine oil can be a major reason of the skin cancer. Pay attention not to exposed and wash

carefully with soap and water after handling.

7. If compressed air is used to clean the brake, dust scattered in the air can be breathed in by workers. Please take action

not to scatter dust in the brake cleaner, etc.

8. Flammable nitrogen gas is generated during charging the battery so charging must be performed in well-ventilated

area and free of the open fire and spark.

SERVICE RULES

1. Parts and lubrication oil must be DAELIM genuine or

recommended parts.

2. Before maintenance, remove deposit or dust from the

chasis.

3. Store the parts of each system discriminatively to

install each part in the right place.

4. After removing gasket, O-ring, piston pin clip and cot-

ter pin, always replace them with the new one. When
removing the snap ring, it can be easily missed after
transformation or installation.

SERVICE INFORMATION

Summary of Contents for S3





















Reviews: