DAELIM CORDI -, Owner'S Manual

Page: 46 / 64

③
Press a headlight bulb with a light
force and rotate it to counterclockwise
to disassemble it.
④
Replace with new bulb. Apply reverse
order of disassembly for assembly.
HEADLIGHT BULB : 12V 35/35W
[HEADLIGHT LUMINATION ANGLE]
●
Adjust headlight lumination angle by
turning an adjusting bolt on a headlight.
(Use
type screwdriver.)
●
Adjustment is to be carried out with a
front cover not disassembled.
[TAIL/STOP LIGHT BULB]
①
Loosen two screw to disassemble tail
light lens.
②
Press a bulb with a light force and
rotate it to counterclockwise to
disassemble it.
③
Replace it with new bulb. Apply
reverse order of disassembly for
assembly.
TAIL/STOP LIGHT BULB : 12V 21/5W
[WINKER BULB]
<Front Winker Bulb>
①
Loosen one screw to disassemble a
winker lens.
②
Rotate a bulb to counterclockwise to
disassemble.
③
Replace it with new bulb. Apply
reverse order of disassembly for
assembly.
FRONT WINKER BULB : 12V RY 10W
44
CAUTION
●
Lumination angle adjusted
incorrectly may dazzle a facing
driver's eyes or result in difficulty to
show the forward.
CAUTION
●
When disassembling, care is to be
taken for ensuring that a tail light
lens can not be damaged.
●
When replacing a tail light lens, be
sure to assemble lens seal securely.
FRONT COVER
HEADLIGHT SOCKET
HEADLIGHT BULB
RUBBER COVER
LUMINATION
ANGLE ADJUSTING
BOLT
BULB
TAIL LIGHT LENS
SCREWS
SCREW
BULB
WINKER LENS