Daekyung Black Bear DH Series User Manual Download Page 18

Page: 18 / 18

Black Bear is a registered trademark of Daekyung Co., Ltd.
1521-6 Dadae-dong, Saha-gu, Busan, Korea Tel: +82)51-264-6611 Fax: +82)51-264-6615

BLACK BEAR HOIST

1) Thank you for purchasing Black Bear hoists/trolleys.

2) All of Black Bear hoists are manufactured under strict quality control and inspection. We assure

quality hoists with reliable customer service.

3) Please contact us or our local distributor immediately if you find problems/defects in our

hoists.

4) Free After-sales service is provided for 1 year after the purchase.

(Even within the warranty period, some services are charged at additional cost.)

※ Following After-sales service are charged at additional cost

(even within the free After-sales service period):

- Parts replacements due to wear & tear, and abrasion

- Problems (breaking of the hoist) due to users’ mishap or negligence

- Problems (breaking of the hoist) due to natural disasters

- Problems due to voluntary repair/remodeling of the hoist by the user or anybody else other

than Daekyung Co., Ltd. or service points appointed by Daekyung Co. ltd.

- Problems due to use of the hoist in other special/particular environments or working areas

(Please consult with Daekyung Co., Ltd. first)

8. Warranty

- 18 -

ADDRESS : 1521-6 DADAE-DONG, SAHA-GU, BUSAN, KOREA

TEL : +82) 51 264 6611 FAX : +82) 51 264 6615

E-MAIL : [email protected] HTTP : www.dkhoist.com

DAEKYUNG CO., LTD.

Summary of Contents for Black Bear DH Series



















Search results

Summary of Contents for Black Bear DH Series

Reviews:

Related manuals for Black Bear DH Series

Brands by name

Popular brands

Daekyung Black Bear DH Series, User Manual

Search results

Summary of Contents for Black Bear DH Series

Reviews:

Related manuals for Black Bear DH Series

Brands by name

Popular brands