Ⅲ. Method of Usage
How to wear a head strap
– 4 –
Use/Charge
The charging controller turns on a red light, and currently used one illuminates
a blue light.
When the controller is turned off, the remaining battery can be checked by
pressing the button and the light is on or not, and the green light turns on
when the battery is sufficient and the red light turns on when charging is
required.
The fully charged controller can be used for 5 to 8 hours depending on the air
purifier flow rate.
If you are using it for the first, please recharge it before use.
After removing the air purifier and controller, charge the controller.
The controller takes about 2 hours to fully charged, but the charging time
depends on the battery remaining on the controller.
Check the charger voltage (220V).
①
Place the protruding part of the headband on the inside of the mask and the
smooth part on the outside, then insert it into the product hole.
②
Pull out the plastic for adjusting the size of the hair strap so that it does not fall
over the protruding part, and then put the hair strap attached to the product
into the plastic.
③
Adjust the length of the attached string to fit your face.
④
Pass the strap behind your head to secure the product well.
Summary of Contents for AIRPROM2 DH-WAPM2
Page 1: ...DAEHYUNENTEC AIRPROM2 User Manual English...
Page 14: ...DAEHYUNENTEC...
