User Guide
STAR L02
2
Maximum driver quantity per serial connection is limited. Using more quantity per run will cause overload from SMPS which
damages all connected products. This will cause voltage drop and also dimmed lighting output.
CAUTION
Keep extension lead
wires as short as possible.
Refer to below table for
specific length.
CONNECTION GUIDE
Use recommended length for pitch between each module to achieve optimum lighting output while maintaining lowest unit
cost. Failure or misplacing will cause dimmed spots or uneven appearance of light on the surface.
LAYOUT DENSITY
GUIDELINES
RECOMMENDED PITCH PER DEPTH
140 mm
70 mm
100 mm
140 mm
55 mm
100 mm
70 mm
40 mm
RECOMMENDED LAYOUT DENSITY PER CHANNEL WIDTH
80 mm
200 mm
400 mm
316 mm
Use 10% shorter length
than usual for circular arrange
CONNECTION WITH
POWER SUPPLY
Output (W)
Model Name
Recommended
Extension Wire
Output (A)
Max Q’TY
Maximum Length
30W
2.5A
PSCV03012
5M (15FT)
VCTF1.25
AWG18
60W
5A
PSCV06012
5M (15FT)
VCTF2.0
AWG14
120W
10A
PSCV12012
5M (15FT)
VCTF2.0
AWG12
300W
25A
PSCV30012**
15M (50FT)
VCTF5.5
AWG4
600W
50A
PSCV60012**
15M (50FT)
VCTF8.0
AWG2
EXTENSION OF POWER SUPPLY LEAD WIRES
*Maximum quantity for S-LED is based on 85% of specified capacity of power supplies for extended lifespan
**PSCV30012, PSCV60012 are not weather-proof
Equip with protective box for outdoor use and the box should have ventilating holes
32pcs
64pcs
128pcs
320pcs
640pcs
FARD lighting GmbH Seestrasse 20 D - 14974 Ludwigsfelde OT Genshagen
Tel. +49 - (0)3378 / 2003-0 Fax +49 - (0)3378 / 2003-29
[email protected] www.fard-lighting.de
Power Supply
AC Input
DC Output
Make sure that each run should have 50 modules at max
and should use another run in parallel to connect more
Should use thicker wires which can take larger amount of current
than the amount transmitted from the power supply unit
1st
2nd
50th
1st
2nd
1st
2nd
50th
1st
2nd
50th
1st
2nd
50th
