DAEHAN FLEX RGB Series, User Manual

Page: 3 / 4

User Guide
3
FLEX RGB Series - T20100
INSTALLATION GUIDE
1. DETERMINE LAYOUT
Refer to ‘LAYOUT DENSITY GUIDELINES’ on page 2 to
determine spacing and amount of LEDs required.
SUPPORTS FOR OUR SIGNMATES
Ask us to obtain accurate layout
Stroke Width
Channel Depth
Drawn by Brad Han
Date : 2009. 1. 1.
Rev. 0
Tel : +82 32 858 0491
www.daehantrans.com
Fax : +82 32 832 8421
bhan@daehantrans.com
MATERIAL ESTIMATE
Attention to : John Doe Page 1 of 1
NUMBER OF SET Information Model Power Supply Quantity Color Quantity
STAR C04 WHITE 143EA DC12V 120W 2
S
-LED ESTIM
A
TE /SE
T
SUMM
AR
Y
POWER ESTIM
A
T
E /SE
T
MODULE PITCH
1
QUANTITY PER SET 143EA
TOTAL CLUSTERS 143EA
WATTAGE PER SET 187W
TOTAL WATTAGE 187W
120mm
*This is for estimating purposes only. Material Estimates for S-LED system are based upon given font, letter height, depth, face material, and any special instructions. *Missing information will affect the final results *Power consumption is calculated with extra 15% for extended life of power supplies
*All signs should be tested for acceptable color, illumination and operation. Use appropriate power supply for testing
*For detailed information, please refer to the applicable S-LED product found under http://www.daehantrans.com/download/products2007.pdf
AC 200V
to
AC 240V
1856mm 2082mm 2176mm 2246mm (Unit Length) 1768mm 1768mm
SMPS
DC12V
DOUBLE LAYOUT
Stroke Width : 80mm
Channel Depth : 80mm
Channel Size : 2389mm
x 439mm
R30mm
or more
Connection
Connection
R30mm
or more
Connection
R30mm
or more
Connection
Connection
R30mm
or more
Connection
CAUTION
When handling the module, avoid twisting or bending unit in
less than R20mm(40mm in diameter)
2. CUT INTO REQUIRED LENGTH
FLEX RGB T20100
TOP
BOTTOM
Soldering Pad
(Solder lead wire here)
Cut only at
‘CUT MARK’
Using predetermined layout and LED placement
from step 1, divide channels into sections and
distribute each section to corresponding power
supplies.
CAUTION
Before connect with power supplies, check
polarity on every connections
4. CONNECT WITH POWER SUPPLY
SUPER GLUE :
Units can be secured with super glue.
Use super glue made for outdoor use with moisture
resistance. Do not put glue on the top of LED lamps.
SILICON :
If desired, modules can be secured with
silicon. Do not to put silicon on the top of LED lamps.
3. FIX UNITS PERMANENTLY
SUPER GLUE
120W
AC Input
DC Output
60W
AC Input
DC Output
DAEHANTRANS CO.,LTD
#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea
Tel. +82 32 858 0491 Fax. +82 32 832 8421 enquiry@daehantrans.com / www.daehantrans.com