User Guide
2
FLEX RGB Series - T20100
20 mm
40 mm
40 mm
60 mm
40 mm
40 mm
20 mm
40 mm
80 mm
80 mm
CONNECTION WITH
POWER SUPPLY
Output (W)
Model Name
Max Q’TY - T20100*
Recommended
Extension Wire
Output (A)
Max Q’TY - S20100*
Maximum Length
30W
2.5A
PSCS-0030-12
2.5M
2.5M
5M (15FT)
VCTF1.25
AWG18
60W
5A
PSCS-0060-12
5M
5M
5M (15FT)
VCTF2.0
AWG14
120W
10A
PSCS-0120-12
10M
10M
5M (15FT)
VCTF2.0
AWG12
EXTENSION OF POWER SUPPLY LEAD WIRES
*Maximum quantity for S-LED is based on 85% of specified capacity of power supplies for extended lifespan
Maximum driver quantity per serial connection is limited. Using more quantity per run will cause overload from SMPS which
damages all connected products. This will cause voltage drop and also dimmed lighting output.
CONNECTION GUIDE
+
+
-
SMPS
DC12V
1
2
3
1
2
3
1
2
More than 4 Units
Ensure each run has less than 5 units
and connect each run in parallel. Refer
to below table for maximum units per
power supply.
Connect each run to the
SMPS in parallel
CAUTION
Keep extension lead wires as short as possible.
Refer to below table for specific length.
+
-
SMPS
DC12V
1
2
3
＋
－
&
&
1 to 3 Units
RED
WHITE
CONNECT
&
&
RED
WHITE
RED
WHITE
CONNECT
Use recommended length for pitch between each module to achieve optimum lighting output while maintaining lowest unit
cost. Failure or misplacing will cause dimmed spots or uneven appearance of light on the surface.
LAYOUT DENSITY
GUIDELINES
RECOMMENDED PITCH PER DEPTH
SINGLE
DOUBLE
BEFORE HANDLING
UNITS
Do not flex or bend units with less than 20mm in radius, 40mm in
diameter. Refer to left illustration.
When stored in cold weather, units are stiff. Connect them with
power supplies and wait until they become soft enough to be easily
fabricated.
R20mm
NO
DAEHANTRANS CO.,LTD
#7-11 Songdo-Dong, Yeonsu-Gu, Incheon, Korea
Tel. +82 32 858 0491 Fax. +82 32 832 8421 [email protected] / www.daehantrans.com
