Daedong KIOTI PX9530 Manual Download Page 203

Page: 203 / 256

MainTenance

a40oh03B

ALLOwABLE TOLERANCE OF FREE PLAY

BETwEEN Lh ANd Rh BRAKE PEdALS

1. slightly depress the lh and rh

pedals separately and measure

the free play of both pedals.

2. if the difference between two ped-

als' free play is out of the specified

value, adjust the free play with the

bolt.

- Tighten the mounting nut firmly af

ter adjustment.

(1) Brake pedal (lh) (2) Brake pedal (rh)

(3) adjusting Bolt

(a) free play difference between brake pedals

Make sure that the push rod

does not push the piston with

the pedal released.

•

WARNING

Free play difference between brake

pedals (Lh, Rh)

less than 0.276 in. (7 mm)

TG120-수출향-US-07.indd 19

2017-10-26 오후 1:20:45

Summary of Contents for KIOTI PX9530

































































































































































































































































Search results

Summary of Contents for KIOTI PX9530

Reviews:

Brands by name

Popular brands

Daedong KIOTI PX9530, Manual

Search results

Summary of Contents for KIOTI PX9530

Reviews:

Brands by name

Popular brands