Daedalus Magpie V2, Manual

Page: 15 / 28

13
3) 001 Minimum speed setting, as a percentage of RPM. This shows
a setting of 1%, the lowest speed selection possible while
spinning. This setting is not commonly changed from 1%.
(If you never use speeds under 30%, you could change this
setting 3.030 and your Speed Controller won’t go slower than
30%)
4) 100 Maximum speed setting as a percentage of RPM. This
shows a setting of 100%, meaning that you could go full
throttle and spin at max speed, provided you feel comfortable
doing so. This setting represents the maximum speed you’d
like your Speed Controller to allow for. A new user may want
to make sure they never accidentally go too fast and might
limit their top speed this way. (For instance, changing this
setting to 4.070 would keep the controller from going above
70% speed.)
5) 001 Speed increment adjustment size. This shows 1% increments,
meaning that every time you press Up/Down, the speed will
change in steps of 1%, 2%, 5%, etc., depending on the setting
you’ve selected. A setting of 5.005 means every press of the
Up/Down buttons will increase or decrease your speed by the
initial 5% (e.g., 5, 10, 15, 20% instead of 1, 2, 3, 4%). It would
be very uncommon to change this setting from the default
value of 1% increments.
Charan Sachar