Daedalus Magpie V2, Manual

Page: 12 / 28

The Speed Controller can be used to the side of the Magpie or even
used as a foot pedal. (We have included a small plastic pedal
extension for this purpose.) To remove the Module/Speed Controller,
gently push it out from the back of the Magpie’s face. Keep an eye on
the cord that attaches the motor to the back of the Speed Controller.
To completely free the Speed Controller from the wheel, you’ll need
to disconnect the Motor Cable. Once disconnected, you can free up
the Motor Cable so it can reach the Speed Controller. The Magpie
comes with an Extension Cable that will allow you to use the Speed
Controller on the floor or even to the side of the table or surface
where you are spinning. When using the controller as a foot pedal,
you’ll need to use the Foot Pedal attachment, also included in the
package. This attachment inserts into the small hole above the
Start/Stop button and overlays the Start/Stop button as an extension.
Speed Control Module
10