Frame and Foundation Assembly
2 – End Bar 3/8” x 13/8” x 61/4”
1 – Top Bar 3/4” x 11/16” x 19”
1 – Bottom Bar 3/8” x 11/16” x 1711/16”
1 - Plasticell Foundation
8 – 11/4” Nails
1. Nail the side rails to the Bottom Boards using
the 21/4” nails.
2. Nail the Top Cleat to the top of the Bottom
Board using the 11/4” nails.
3. Nail the Bottom Cleat to the bottom of the
Bottom Board using the 3/4” nails.
(See figure 5 for assembling Bottom Board.)
Bottom Board
1 – Top Cleat 3/4” x 3/4” x 1411/16”
1 – Bottom Cleat 3/8” x 3/4” x 1411/16”
2 – Side Rails 3/4” x 115/16” x 22”
1 – Bottom Boards 3/4” x 153/16” x 22”
4 – 11/4” Nails
16 – 21/4” Nails
4 – 3/4” Nails
End Bar
3/8” x 13/8” x 61/4”
Top Bar
3/4” x 11/16” x 19”
Top Bar
3/4” x 11/16” x 19”
End Bar
3/8” x 13/8” x 61/4”
Top Cleat
Figure 4
Figure 5
Bottom Cleat
Side Rail
Side Rail
Bottom Boards
Foundation sold
separately
1. Assemble Frame using two 11/4” nails in
each corner.
2. Insert Plasticell Foundation into slot in
Bottom Bar.
3. Slightly bend Plasticell as you slide it
into the GTB
.
Use two 11/4” nails
in each corner
Assemble Smoker to Bellows
using the four nuts provided.
(See figure 6.)
Smoker & Bellows
Hive Tool
Figure 6
