DAD TDX3600, User Manual

Page: 20 / 36

20
TDX3600/7000/9000
EN IT
MODALITÀ PARALLEL
Modo di connessione:
Impostare la modalità di funzionamento dell’am-
plificatore su ‘Parallel’.
Con la predisposizione PARALLEL un solo segna-
le viene amplificato da entrambi i canali 1 e 2
dell’amplificatore. In altre parole, un segnale col-
legato all’ingresso del canale 1 viene inviato sia
all’uscita 1 che all’uscita 2.
NOTA - Carico minimo 2 Ohm!
PARALLEL MODE
Connection of this Mode:
Set the amplifier operation mode to ‘Parallel’ po-
sition.
When in this setting, one signal is treated by both
channel 1 and 2 of the amplifier. In other words
a signal connected to input 1 is sent to both out-
put 1 and output 2.
NOTE - 2 Ohm minimum loading!
Fig.7
TDX3600/7000
MAINS AC 220V 50Hz 2300W
OFF
0
CH1 OUTPUT:1+/1-
CH2 OUTPUT:2+/2-
BRG +/-=1+/2-
CH2 OUTPUT:1+/1-
2+/2- NOT IN USE
SPEAKON OUT 1
SPEAKON OUT 2
XLR
1=G
2=+
3= -
CH1 OUTPUT:1+/1-
CH2 OUTPUT:2+/2-
BRG +/-=1+/2-
CH2 OUTPUT:1+/1-
2+/2- NOT IN USE
SPEAKON OUT 1
SPEAKON OUT 2
XLR
1=G
2=+
3= -
MAINS AC 220V 50Hz 4800W
CH1 OUTPUT:1+/1-
CH2 OUTPUT:2+/2-
BRG +/-=1+/2-
SPEAKON OUT 1
CH2 OUTPUT:1+/1-
2+/2- NOT IN USE
SPEAKON OUT 2
XLR
1=G
2=+
3= -
CH1 OUTPUT:
CH2 OUTPUT:2+
BRG +/-=1+/2-
CH2 OUTPUT:
2+/2- NOT
SPEAKON OU
PARALLEL
SENSITIVITY
SENSITIVITY
SENSITIVITY
OPERATION MODE
BRIDGE
PARALLEL
BRIDGE
ON OFF
STEREO
CH1 OUTPUT:
SPEAKON 1+1-
BINDING POST
CH2 OUTPUT:
SPEAKON 2+2-
CH2 OUTPUT:
SPEAKON 1+1-
BINDING POST
CH1 OUTPUT:
SPEAKON 1+1-
BINDING POST
CH2 OUTPUT:
SPEAKON 2+2-
CH2 OUTPUT:
SPEAKON 1+1-
BINDING POST
INPUT SIGNAL CH1
LINK SIGNAL CH1
LINK
POWER
SIGNAL
LINK
POWER
SIGNAL
SENSI
OPERATION
BRIDGE
PARAL
BRIDGE
ON
Serial No
XLR
1=G
2=+
3= -
INPUT SIGNAL CH1
LINK SIGNAL CH1
Serial No
Manufactured in P.R.C.
MUSIC & LIGHTS musiclights.it
DAD is trademark of
Serial No
Manufactured in P.R.C.
MUSIC & LIGHTS
musiclights.it
DAD is trademark of