English
25
Installation instructions
Secure refrigerator to furniture
Whenever possible, perform this step for anti-tip security.
Raise Grille Panel
to Stop Position.
Drive Screws Through
Case Trim Into Adjacent
Cabinets.
The refrigerator must be secured to
prevent tipping.
• Raise the grille panel to access case
trim.
• Drive a screw through the trim and into
the adjacent FURNITURE using holes
provided.
• Follow the same procedure on the
opposite side.
Connect water supply
Check to make sure that Master Power Switch is in the “O” (OFF) position.
Compression Nut
Compression Nut
Compression fitting
Sleeve
Ferrule
Connect a hose from refrigerator and
water line, installed to water pipe like
above figure.
• Turn on the water to check for leaks.
NOTE
Make sure excess tubing length does not
interfere with kickplate installation.
TBI_Dacor_Installation_DA68-03583A-03_EN.indd 25
2020-10-15 10:39:36
