6
Line up the prongs on the new light with the holes
4.
in the light socket. if there are more than two holes,
insert the prongs into the center two holes. you may
need a flashlight to see inside the opening.
gently push up on the new light until it stops.
5.
turn on the main power switch. touch the light key
6.
to make sure it is working.
replacement Parts
Dacor Part Number
Description
101945
Light bulb
101951
filter (two per unit)
a300
Dacor cooktop cleaning cream
a302
Dacor stainless steel cleaner
to order parts and accessories, contact your Dacor
dealer or visit www.everythingdacor.com.
Care and Cleaning
Maintenance
warning
to prevent an electric shock hazard, turn off the
•
main power switch before replacing the light bulb.
to avoid personal injury, make sure the cooktop
•
or range, the hood and the light are cool before
changing the light bulb.
Light Bulb Replacement
Light bulb replacement is considered to be a homeowner
maintenance operation. if the light does not work,
before replacing it, check to make sure that the main
circuit breaker (or fuse) and the main power switch on
the hood are on.
replace the light bulb only with Dacor part no. 101945.
see the replace, available from any authorized Dacor
parts dealer.
turn off the main power switch, located next to the
1.
light.
reach up into the hood and pry the edge of the lens
2.
loose with a flat blade screwdriver, or disposable
plastic knife. If using a flat blade screwdriver, cover
the end with tape to avoid damage to the metal
surfaces.
once the light bulb is loose, pull down on it with a
3.
gentle rocking motion until it pulls free.