background image

5

Standard Burners

Put the burner heads on the burner bases as 

1. 

shown below. Match the correct sizes. The 

bottom of the correct size burner head fits on 

top of the matching burner base. Line up the 

notch on the bottom of each head with the 

ignitor on the matching base.
Twist each head back and forth slightly to make 

2. 

sure it is properly seated.
Put the cap covers on top of the burner heads. 

3. 

The ridge around the bottom edge of the cap 

cover goes around the top of the burner head. 

Grates

Gently set the grates on top of the spill tray. Put the 

legs of each grate into the corresponding dimples.

Setting Up Your Cooktop

Burner and Grate Assembly

 WARNING

Assemble the burners and grates only when the cooktop 

is cool.

SimmerSear Burner

Put the cross ring(s) on the SimmerSear base(s) 

1. 

as shown. On model PGM365-1 be sure to match 

the correct size to the correct burner base. 

Insert the pin on the bottom of the ring into the 

hole on the base as shown. Twist the ring back 

and forth slightly to make sure it is properly 

seated.
Place the burner skirt(s) over the cross ring as 

2. 

shown. On model PGM365-1 be sure to match 

the correct size.
Put the burner head(s) in place as shown below. 

3. 

The hole on the bottom goes over the locating 

pin on the top of the cross ring. Twist the head 

back and forth slightly to make sure it is prop-

erly seated.
Put the burner cap(s) on the burner head(s) 

4. 

as shown below. Center the bottom of the cap 

inside the base. On model PGM365-1 be sure to 

match the correct size. 
Put the cap cover(s) on top of the burner 

5. 

caps(s). The ridge around the bottom edge of 

the cap cover goes around the top of the burner 

cap. On model PGM365-1 be sure to match the 

correct size.

SimmerSear Burner Assembly

Burner Cap

Burner Head

Base

Cross Ring

Skirt

Cap Cover

Wide Side

Down!

Insert Pin on Bottom

of Cross Ring into

Hole on Base

Put Hole in Bottom 

of Burner Head Over Pin 

on Top of Cross Ring

Single Burner Assembly

Burner Head

Cap Cover

Line Up Notch

on Bottom of

Head with Igniter

Summary of Contents for Preference PGM304-1

















Reviews: