2
P
RODUCT
D
IMENSIONS
D
ESIGN
S
PECIFICATIONS
Make sure the area selected for the installation site meets
product dimension requirements.
I
NSTALLATION
S
PECIFICATIONS
M
ATERIALS NOT INCLUDED BUT
N
EEDED FOR
A
LL
I
NSTALLATIONS
•
90° elbow (3/8” NPT external thread on one end, opposite
end sized to fit water supply)
•
Strain relief for electrical connection
•
Thread seal tape, pipe seal tape, or joint compound
•
UL listed wire connectors (3)
•
Screw-type hose clamps
NOTE:
Do not use old parts.
M
ATERIALS NOT INCLUDED BUT
N
EEDED FOR
N
EW
I
NSTALLATIONS
•
Air gap for drain hose (if applicable for local codes)
•
Y-branch tailpiece
(see Figure 5, page 5)
for house
plumbing, if applicable
•
Water in-line 3/8” minimum copper or 1/2” minimum plastic
(plastic must be tested for temperature and pressure)
•
Electrical cable or power cord
•
Hand shut-off valve (recommended)
T
OOLS NOT INCLUDED BUT
N
EEDED
FOR
A
LL
I
NSTALLATIONS
•
Phillips head and flat blade screw drivers
•
3/8”, 5/16” and 1/4” nut drivers
•
Level
•
Carpenter’s square
•
Measuring tape
•
Safety glasses
•
Flashlight
•
Bucket to catch water when flushing the line
•
Tubing cutter
•
Gloves
•
Wire strippers
•
Electrical tape
•
Duct tape
T
OOLS NOT INCLUDED BUT
N
EEDED
FOR
N
EW
I
NSTALLATIONS
•
Drill and appropriate bits
•
Hole saw set
P
ARTS
S
UPPLIED
•
Junction box cover and cover screw
•
2-piece toekick with sound insulation
•
Countertop mounting screws (2)
•
Cabinet mounting screws (2)
•
Color-matched toekick screws (2)
•
Leveling legs (2)
•
Spanner wrench for leveling legs
Remove the hardware accessory bag and other
parts from inside of the dishwasher. Parts supplied
include:
FIG 1