background image

Installation Specifications ................................................ 6

Planning the Installation ................................................... 6

Planning the Duct Work ................................................... 8

Installation Instructions .................................................. 12

Installation Preparation .................................................. 12

Installing the Downdraft Vent in the Cutout ................... 13

Verifying Proper Operation ............................................. 16

Installation Checklist ...................................................... 16

Wiring Diagram: All Models ............................................ 17

CABP3 Cabinet Blower Ratings ..................................... 17

Table of Contents

Before You Begin...

Important Safety Instructions .......................................... 1

Safety Symbols and Labels ............................................. 1

General Safety Precautions ............................................. 2

Product Specifications ..................................................... 2

Electrical Specifications ................................................... 2

Dimensions: MRV3015, 

MRV3615

.....

...

........

......

.............

.

3

Dimensions: 

HRV46, 

MRV48

..

..............

.............

.

............

.

.

4

Dimensions:

 MRV30

15

-ER, 

MRV36-

ER

, MRV48-ER

...

.

.

.5

Installer:

 In the interest of safety and to minimize problems, read these installation instructions completely and care-

fully before you begin the installation process. Leave these installation instructions with the customer.

Customer:

 Keep these installation instructions for future reference and the local electrical inspector’s use.

Customer Assurance Information

All specifications subject to change without notice. Dacor

 

assumes no liability for such changes.

© 201

8

 Dacor, all rights reserved.

Model Number Description

MRV3015

30” wide downdraft vent; MRV-style top cap

MRV3615

36” wide downdraft vent; MRV-style top cap

MRV36-ER

36” wide downdraft vent; MRV-style top cap

MRV48

48” wide downdraft vent; MRV-style top cap

MRV48-ER

48” wide downdraft vent; MRV-style top cap

If You Need Help...

For installation or warranty questions/issues, contact Dacor Customer Assurance. Have available the vent’s model and 

serial numbers, which are on the data label on the front of the unit. This label includes power-supply requirements.

Dacor Customer Assurance:

 Phone: 

833-35

-

ELITE (833-353-5483) 

USA, Canada; Mon - Fri 5:00 

a

.

m

.

 to 5:00 

p

.

m

.

 

Pacific Time; Website: www.dacor.com/customer-care/contact-us

Model Identification

Use 

HRV, 

and MRV downdraft

 

vents with approved Dacor cooktops and ranges only.

H

RV46

46” wide downdraft vent; 

H

RV-style top cap

MRV3

0

15

-ER

3

0

” wide downdraft vent; MRV-style top cap

Summary of Contents for HRV46





















Reviews: