Dacor ER30DSRSCH, Use And Care Manual

Page: 21 / 36

19
If you want to cook using a different probe temperature, enter
it on the keypad. Use the USDA Minimum Safe Cooking
Temperature Chart as a guideline for the type of meat you
are cooking.
Press
START . If you do not press START , the probe mode will
start automatically after six seconds.
When the meat probe is in use, the oven will automatically
control the cooking time. The temperature on the display during
cooking is the temperature measured inside the meat. The oven
will continue to cook until the meat temperature reaches the
temperature you have entered.
When the meat is done, the oven will go into hold mode. The
temperature will reduce to 150°F for two hours to keep the
meat warm and safe for serving. To prevent sickness, do not
allow foods to remain in the oven after it has turned off. Press
CANCEL/SECURE to cancel hold mode and turn the oven
completely off.
To change the meat probe temperature during
cooking:
Press PROBE . The current probe temperature will appear on
the display.
Enter the new temperature. The oven will automatically
change to the new probe temperature. If you do not enter
a temperature, the oven will continue to cook at the current
setting.
To change the cooking mode during meat probe
cooking:
Press the key for the new desired cooking mode ( BAKE ,
CONVECTION BAKE , PURE CONVECTION , or
CONVECTION ROAST ).
You may enter a new temperature on the keypad or use the
default temperature.
Push
START . The oven will cook until the meat’s internal
temperature reaches the previously selected meat probe
temperature.
To cancel meat probe operation while the oven is
cooking:
Press the PROBE key twice. Disconnect the meat probe from
the connector. If you do not disconnect the meat probe, an error
tone will sound. The oven will return to any previous settings
that were entered before the PROBE key was pressed.
7.
8.
1.
2.
1.
2.
3.
•
Using the Meat Probe
When you cook foods like roasts and poultry,
the internal temperature is the best way to tell
when the food is properly cooked. Your oven’s
meat probe is an easy way to take the guesswork out of roasting.
You can use it to cook food to the exact temperature you desire.
The probe can be set from 100°F to 200°F.
NOTE : The meat probe does not work with the BROIL or
CONVECTION BROIL modes.
WARNING
To avoid the possibility of burns, use hot pads to handle,
connect, and unplug the meat probe when the oven is hot.
Use the handles to insert and remove the meat probe’s
skewer and to connect it to the oven. Pushing or pulling on
either end of the cable could damage the meat probe.
To avoid breaking the meat probe, make sure the food is
completely defrosted before inserting the skewer.
Never store the meat probe inside the oven, especially
during the self-clean cycle.
Use of meat probes other than the one provided with your
range may result in damage to the meat probe and/or the
oven.
•
•
•
•
•
To use the meat probe:
Prepare the meat for cooking prior to setting the oven. Insert
the meat probe skewer into the center of the meat. Make sure
that the skewer is not inside any fatty portions of the meat and
does not touch any bones. The point should rest in the thickest
part of the meat. When you are cooking fowl, the tip of the
skewer should rest toward the center of the bird.
Before putting the meat in the oven, close the door and push
the BAKE , CONVECTION BAKE , PURE CONVECTION
or CONVECTION ROAST key. The preset temperature will
appear on the display. If you want to cook using a different
oven temperature, enter it on the keypad.
Press
START .
Allow the oven to preheat.
Once the oven has preheated, put the meat in the oven using
potholders. Plug the meat probe into the connector inside the
oven.
Push the
PROBE key. The preset temperature (160°F) will
appear on the display.
1.
2.
3.
4.
5.
6.
Operating the Oven
Skewer
Plug
Meat probe