4
Installation Instructions
Before Operation
NOTE:
Dacor recommends cleaning the appliance according to
the cleaning instructions in the use and care manual before use.
IMPORTANT:
Read the use and care manual completely before operation.
◊
The importance of the proper installation of your Dacor
◊
built-In appliance cannot be overemphasized. To ensure a
safe and proper installation, the following checklist should
be completed by the installer to ensure that no part of the
installation has been overlooked.
Installation Checklist
Has the appliance been secured in place in the countertop or
□
cabinet?
Are all leveling legs extended down to make contact with the
□
floor? Is the unit level?
Is the power cord plugged into a properly grounded dedicated
□
three prong electrical outlet, which has been installed in
accordance with all applicable electrical codes?
Has the warranty been activated on-line or the warranty card
□
been filled out completely and mailed?
Once the power cord is connected and the unit is turned on,
the appliance will take several hours to cool down. Load the
compartment once it is cool. See the use and care manual for
further instructions.
If the appliance does not work after performing the above
checklist, contact Dacor Distinctive Service at (877) 337-3226. Do
not attempt to repair the appliance yourself.
Dacor is not responsible for the cost of correcting problems
caused by a faulty installation.
Handle Installation
Insert the end caps into
1.
the center portion of the
handle.
Thread the included set
2.
screws two turns into
the handle end caps.
End caps
Set screws
Put both ends of the
3.
handle over the handle
mounting pins on the
refrigerator.
Tighten both set screws
4.
into place using the
included Allen wrench.
Do not overtighten.
Summary of Contents for EF24LWCZ1SS
Page 7: ......
Page 8: ...Dacor Phone 800 793 0093 FAX 626 403 3130 www Dacor com...
