English
12
Safety and warning information
Safety and warning information
Installation safety
WARNING
To reduce the risk of fire, electric shock, personal injury, or death, observe these
precautions:
• The cooktop should be installed and properly grounded by a
qualified installer
, as
specified in the Installation Instructions. Adjustments and service should be performed
only by qualified gas cooktop installer or service technician.
•
Do not try
to service/modify/replace the cooktop or any part of it unless specifically
recommended in this manual. All other service should be performed by a qualified
technician.
• Use only new, flexible connectors when installing the cooktop.
•
Make sure
the cooktop's hold-down brackets are properly installed. (See the
Installation
Instructions
for details.)
•
Remove
all tape and packaging materials.
• After unpacking the cooktop,
remove
all accessories from inside and around it.
(Cautiously handle the heavy grates.)
•
Make sure
no parts came loose during shipping.
•
Make sure
the cooktop is correctly installed/adjusted by a qualified service technician
or installer for the type of gas (natural or LP) you will use. For the cooktop to use
LP gas, the installer must replace every surface burner orifices with the provided
LP orifice set, and reverse the GPR adapter. These adjustments must be made by a
qualified technician according to manufacturer instructions and local regulations. The
qualified agency performing this work shall be responsible for the gas conversion.
• Installation of this cooktop must conform with local codes or, in the absence of local
codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current Natural Gas and Propane Installation Code,
CAN/CGA-B149.1, or the current Propane Installation Code, CAN/CGA-B149.2, and with
local codes where applicable. This cooktop has been design-certified by ETL according
to ANSI Z21.1, latest edition, and Canadian Gas Association according to CAN/CGA-1.1,
latest edition.
Install_NA9300K_MOD_DTG30M954FS_DG68-00926A-01_EN+MES+CFR.indb 12
6/19/2018 6:49:12 PM
Summary of Contents for DTG30M954F
