Installation instructions
English
42
14. Aligning the Panel
NOTE
Each custom panel comes with 12 dedicated screws for fine-tuning. Use a minimum
number of screws to fine-tune the custom panel with the cabinet. Once fine-tuning is
complete, fix the custom panel with the top nut.
There are two panel-adjustment mechanisms at the top and two at the bottom of the door.
Adjust the panel so it aligns with the surrounding cabinetry.
The gap between the cabinet and the panel must be:
• 1/8” (3 mm) on top
• 1/8” (3 mm) on the side
1/8”
1/8”
1/8”
Top of the Door
1.
Use the double-threaded bolts to align the door panel.
2.
Engage a side screw (see the graphic) to shift the panel side to side.
3.
Engage Screw 1 (see the graphic) to shift the panel forward/backward; engage Screw
2 to set the panel in place.
Dacor_T-TYPE_BRF9000C_IM_DA68-03621K-01_EN (A5).indd 42
2023-06-01 11:05:51
Summary of Contents for DRF48 Series
Page 52: ...DA68 03621K 01 Dacor_T TYPE_BRF9000C_IM_DA68 03621K 01_EN A5 indd 52 2023 06 01 11 05 54...
Page 104: ...DA68 03621K 01 Dacor_T TYPE_BRF9000C_IM_DA68 03621K 01_MES A5 indd 52 2023 06 01 11 05 00...
Page 156: ...DA68 03621K 01 Dacor_T TYPE_BRF9000C_IM_DA68 03621K 01_CFR A5 indd 52 2023 06 01 11 05 26...
