English
23
Installation instructions
Electrical connection
WARNING
Electrical Shock Hazard
•
Disconnect power before servicing.
•
Use 8-gauge, solid-copper wire.
•
Ground the oven.
Failure to follow these instructions can cause electrical shock, fire, or death. This oven is
manufactured with a neutral (white) power supply wire and a cabinet-connected ground
(green or bare) wire twisted together.
1. Disconnect power.
2. Feed the flexible conduit from the oven
through the opening in the cabinet.
3. Remove the junction box cover, and
install a UL-listed or CSA-approved
conduit connector to the junction box.
4. Route the oven's flexible conduit to the
junction box through a UL-listed or
CSA-approved conduit connector.
5. Tighten conduit connector screws.
6. See the chart on pg. 24 to complete
installation for your electrical
connection.
UL-listed or
CSA-approved
conduit
connector
