English
10
Installation requirements
Installation requirements
Location requirements
IMPORTANT
: Observe all governing ordinances.
•
Specified cabinet-opening dimensions are minimums and must be followed.
•
Cabinet recess must completely enclose all but the oven face.
•
Grounded electrical supply is required. (See
Electrical connection
.)
•
Locate the junction box no more than 3” (7.6 cm) below the support platform. A
1” (2.5 cm) minimum diameter hole should be drilled in the right or left rear corner
of the platform so the oven's power plug can access the junction box.
•
The support platform must be solid, level, flush with bottom of cabinet cutout, and
able to support 287 lb (130 kg).
•
Install the oven at least 12” (30 cm) away from other appliances.
IMPORTANT: Check with your builder or cabinet supplier to ensure the materials used
will not discolor, delaminate, or not be otherwise damaged. This oven is designed
according to the requirements of UL and CSA International and complies with the
maximum allowable wood cabinet temperatures of 194 °F (90 °C).
