19
Installation Instructions
Adjusting the Height
Refer to the images at the right while following these steps:
The bolts that adjust the refrigerator’s height are near
the front feet. They adjust both the rear and front of the
refrigerator.
Caution
: If the doors are adjusted too far, the sensors can
fail to detect the doors.
1. Remove the bottom grill. Be carefull not to scratch the
stainless steel surface while removing the screws.
2. Use the wrench tool on the bolt to adjust the
front
height.
3. Use a 5/16” socket wrench on the small bolt to adjust
the
rear
height.
Turn the bolts clockwise to raise; counterclockwise to
lower.
4. Use a level to ensure the refrigerator is parallel and
aligned.
5. Attach the bottom grill with previous screws.
WARNING
Tip Hazard
Refrigerator is top-heavy and tips easily when not
securely installed.
Keep doors taped closed until refrigerator is in its final
position and ready to be secured in place.
Use two or more people to move and install refrigerator.
Failure to do so can result in death or serious injury
.
Wrench Tool
5/8” Socket wrench
Phillips screwdriver
Tools Needed:
Wrench
5/16 Socket
Adjusting Rear Height with Socket Wrench
Adjusting Front Height with Wrench
Removing the Bottom Grill
AVERTISSEMENT
