16
Installation Instructions
Connecting the Water Line
Finish the instructions on the previous page called
“Connecting to the Main Water Supply.”
The “water line” refers to the line or pipe that connects the
refrigerator to the house’s main water supply.
Check for and repair any water leaks at the main water
supply valve before continuing.
1. Remove the bottom grill.
Use a Phillips screwdriver to remove the screws on the
right and left corners of the grill. Keep the screws in a
safe place.
2. Find and free the water line that is tucked underneath
the refrigerator.
3. Connect the main water supply to the end of this water
line.
4. Check for water leaks before moving the refrigerator
into the cabinet.
Place a towel underneath the couplings before testing;
this will soak up any possible leaks.
5. Replace the bottom grill.
6. Flush air and impurities from the water system by
continuously running the dispenser for five gallons.
Note: Allow a 1~2 minute delay in water flow to allow the
water tank to fill.
Removing Bottom Grill
Accessing Water Line
Connecting Water Line to Water Supply
Flushing Through the Water Dispenser
