16
English
Troubleshooting
This table lists various minor problems concerning hood issues, possible causes, and solutions. If you
have an issue listed in this table, try resolving the issue by applying the corresponding solution. If
you cannot resolve the issue, contact Dacor. (See
Warranty and Service
(Pg. 17), for contact info.
Problem
Cause(s)
Solution
Nothing works (control
panel not lit; fan/lights
not working)
Main power switch is OFF; Power to
hood OFF
Check hood's main power switch; turn on power at
source
; check for tripped breaker or blown fuse.
Power outage
Call your electric company
Hood not connected to power source
Have electrician connect hood to power source.
Light(s) not working
(control panel lit; fan
working)
Light bulb loose
Screw in bulb completely (Pg.
14
).
Light bulb burned out
Replace bulb (Pg.
14
).
Fan not drawing heat
and
smoke properly
Fan speed too low
See Operating Instructions section.
Filters clogged/dirty Open window,
draft, HVAC interference
Ensure filters are clean and free of grease/debris;
check for drafts and airflow interference.
Damper jammed shut; ducting clogged Consult qualified installation professional*.
Fan shuts off by itself
Hood’s “Timed” feature was set
If timer is set, fan turns off after set time. Max time: 99
min. (Setting/Turning off the timer, Pg. 10).
Fan not working (control
panel lit; lights working)
Fan electrical malfunction
Call for service.
Fan comes on by itself
AUTO-ON was started
* Dacor does not manufacture/warrant/service the ducting that vents heat/smoke from the hood's chimney to the outside.
The owner shall have a qualified person install/maintain the ducting.
ConnectOn™ not
working
The hood is not connected to the
cooktop.
Bluetooth light blinks or
shuts off automatically
The hood has trouble connecting to
a compatible range or cooktop
Exhaust fan starts automatically if Auto-ON is enabled
or if unit is
pair
ed via Bluetooth with a Dacor cooktop
and the cooktop is on; press POWER to turn off the fan.
Only a Dacor-compatible cooktop can be paired with
the hood. (
S
ee Before
U
sing ConnectOn™,
P
g. 1
2
.)
Reset bluetooth on hood: Press-hold both Light and
ConnectOn for 5 sec's (display shows bT and
changes to rT)