14
English
Care and Maintenance
Cleaning the Filters and Grease Channel
Grease Channel
If you cannot reach the channel from the floor, us
e
a stepstool or similar sturdy device to help.
1.
Unhinge (lift with both hands), and
clean the
grease channel with a hot, soapy
sponge.
2.
Wash the filters in hot, soapy water, or in a
dishwasher.
3.
Thoroughly dry the grease channel and filters.
1.
Reattach the grease channel.
2.
Grasping the knobs, press the filter’s front edge against the tension clip until
the filter’s
rear edge
clears the grease channel.
3.
Carefully raise the filter’s rear edge up into the hood.
4.
Gently release tension on the clip, and rest the filter’s rear edge on the grease
channel.
5.
Wipe away fingerprints, and adjust the components as needed.
Reinstalling the Filters and Grease Channel
Replacing the Light Bulbs
•
The owner changes the bulb. Before replacing a bulb (or if a light does not work), verify that
power is ON at the circuit breaker, fuse box, light swich, or main power switch.
•
Turn power OFF at the fuse box or circuit breaker panel before replacing the bulb.
•
Use bulbs no stronger than 7.5W LED or 75W, 120V Halogen.
•
Ensure the hood and bulb lens are cool before changing the bulb.
•
Use only dimmable bulbs.
WARNING
To reduce risk of fire, electric shock, and personal injury: