background image

•  Put the two cabinet guide assemblies, and shims if 

necessary, as shown, on the inside surfaces of the 

cabinet. Position them flush with the front edge of 

the cutout opening.

•  Insert the screws in the holes of the guides without 

tightening them completely.

•  Make sure the outside distance between the fixing 

angles is 22 1/8” (562mm) and that the guides are 

level. Change the number of shims or adjust the 

fixing angles as necessary.

IMPORTANT: Make sure that guides are level.

•  Tighten all of the screws. 

•  Make sure that the power cord and water feed line 

can be fed freely through the back wall.

•  In order to avoid overheating the coffee system, 

make an opening of at least 3 15/16” (100mm) at the 

back of the cabinet to allow air to circulate.

 

The cabinet guides mount to the inside of the cabinet. 

The glides on the coffee system slide into the cabinet 

guides. The guide system allows the coffee system to 

slide in and out of the cabinet for loading the coffee 

bins and for maintenance.

To install the cabinet guides:

•  Determine the number of shims required to mount the 

cabinet guide assemblies according to the chart and 

diagrams below. The appliance is supplied with six 

1/16” (1mm) metal shims. Use the shims to position 

the fixing angles so that they are properly spaced. 

The appliance will not slide in and out of the cabinet 

properly if the fixing angles are not properly spaced.

I

nsTallaTIon

 I

nsTruCTIons

22 1/8” (562mm) Min.

3/4” (19mm)

Min. Side Walls

3 15/16” (100mm)

Cabinet Back Cutout for

Air Circulation

Side Wall

Shim

Fixing Angle

Cabinet

Guide

Cabinet

Guide

Asssembly

Cutout Width

Number of Metal Shims Required

22 1/8” (562mm)

0

22 3/16” (564mm)

2 total (1 on each side)

22 1/4” (566mm)

4 total (2 on each side)

22 3/8” (568mm)

6 total (3 on each side)

Front

Rear

Cabinet Glide Installation

I

nsTallIng

 

The

 C

abIneT

 g

lIDes

Cabinet Guide Assembly and Shims

Summary of Contents for CM24TBISAS

















Reviews: