Dacor CM24P-1, Use And Care Manual, Page: 43 / 52

Use and Care Manual
Repeat step 12, four more times.
Remove the plastic bottle from the milk compartment and flush
the residual detergent out of the system (see below).
Remove the water tank from the unit. Empty it, rinse it out with
filtered water, and put it back in the unit.
Fill the water tank with filtered water until full.
Fill a 16 ounce plastic bottle with filtered water, and put it in the
milk compartment and insert the milk tube into the water.
With a 2-quart container or
saucepan on the drip tray to
catch the rinse water, push and
hold the CLEAN (decaffeinated
coffee) button until “Clean
Insert Cleaner“ appears on the
display.
Push CLEAN again to
immediately start rinsing out the unit. Note that if the CLEAN
button is not pressed again, the rinse will automatically start in
about 20 seconds.
Meanwhile fill a second plastic water bottle with clean, filtered
water. “Rinse” will appear on the display. Remove the first bottle
from the milk compartment and replace it with the second. Put
the milk tube into water.
When final rinse is complete, the display will say “Machine
Ready”.
Push the hot water button to flush the hot water
dispenser.
Remove the milk tube from the plastic bottle.
Remove the plastic bottle and close the
compartment. Remove the container or saucepan
from the drip tray.
13.
14.
A.
B.
C.
D.
E.
F.
G.
H.
I.
Cleaning and Maintenance
Flushing Out the Coffee System