Dacia 2014 Logan MCV, Driver'S Handbook Manual

Page: 197 / 238

Jaune Noir Noir texte
5.33
ENG_UD26990_1
Balais d’essuie-vitres (X52 - Dacia) ENG_NU_993-5_X52_Dacia_5
WIPER BLADES
Replacing windscreen wiper
blades 1
– With the ignition switched off, lift
wiper arm 3 ;
– turn the blade horizontally (move-
ment A );
– press tab 2 and slide the wiper blade
downwards (movement D ) until
hook 4 on the wiper arm is released.
– slide the blade (movement C ) then
lift it (movement B ) to release it.
1
2
3
4
Replacing the rear screen
wiper blade 6
– With the ignition switched off, lift
wiper arm 5 ;
– pivot the blade 6 until some resist-
ance is met;
– pull the blade to release it (move-
ment E ).
Refitting a front or rear wiper
blade
To refit the wiper blade, proceed in re-
verse order to removal. Make sure that
the blade is correctly locked in position.
Check the condition of the wiper
blades. You are responsible for their
service life:
– clean the blades, windscreen and
rear screen regularly with soapy
water;
– do not use them when the wind-
screen or rear screen are dry;
– free them from the windscreen or
rear screen when they have not
been used for a long time.
– In frosty weather, make
sure that the wiper blades
are not stuck by ice (to
avoid the risk of the motor
overheating).
– Check the condition of the wiper
blades.
Replace the wiper blades as soon
as they begin to lose efficiency
(approximately once a year).
Whilst changing the blade, take care
not to drop the arm onto the window
after it has been removed as this
may break the window.
A
D
C
B
5
6
E