10
SECTION 3: UNPACKING, SHIPPING, AND INSTALLATION
3.1 Operational Conditions
3.1.1 Room temperature within 10~30
℃
(50-85 °F)
;
3.1.2 Relative room humidity inferior to 65%;
3.1.3 The environment should have minimal shock and vibration;
3.1.4 Do not place Brinell tester in an corrosive atmosphere.
3.1 Unpacking
When moving the box, lift from the bottom using appropriate lifting techniques
.
The OMEGA-HB Brinell hardness tester
is constructed of sensitive electronic and
mechanical components. Do not drop.
Use caution when unloading to prevent injury.
3.3 Installation
Install unit carefully! Improper installation voids warranty.
3.3.1 TABLE LOCATION
Installation of the
OMEGA-HB
should be on a flat sturdy surface, with easy access to
electrical connections. For maximum height adjustment it is recommended that a 90
mm hole be drilled in the supporting table as per the above diagram.
