background image

2.2 Disposal Guide

1. 

If conditions permit, make sure that the battery is fully discharged before disposing of it in a 

    designated battery recycling bin. The product contains batteries with potentially dangerous 
    chemicals, so it is strictly prohibited to dispose of it in ordinary trash cans. For more details, 
    please follow the local laws and regulations on battery recycling and disposal.

2. 

If the battery cannot be fully discharged due to a product failure, do not dispose of the 

    battery directly in the battery recycling box. In such cases, contact a professional 
    battery recycling company for further processing.

3. 

Please dispose of over-discharged batteries that cannot be recharged.

7. 

It is highly recommended that third-party accessories are purchased from reliable 

    distributors and that they match your product’s specifications. Dabbsson is not liable for 
    abnormality, inconvenience, losses or expenses resulting from defective third-party 
    accessories.

8. 

When using the product, please strictly follow the operating environment temperature 

    specified in this user manual. If the temperature is too high, it may result in a fire or 
    explosion; if the temperature is too low, the product performance may be severely reduced, 
    or the product may cease to work.

9. 

Do not forcibly lock the fan during use or place the product in an unventilated or dusty area.

10. 

Avoid impact, falls, or severe vibrations when using the product. In case of a  severe 

      external impact, turn off the power supply immediately and stop using the product. Ensure 
      the product is well fastened during transportation to avoid vibrations and impacts.

11. 

If you accidentally drop the product into water during use, place it in a safe open area, and 

      stay away from it until it is completely dry. The dried product should not be used again, and 
      should be properly disposed of according to Section 2.2 below. If the product catches fire, 
      we recommend that you use the fire extinguishers in the following order: water or water 
      mist, sand, fire blanket, dry powder, and finally a carbon dioxide fire extinguisher.

12. 

Use a dry cloth to clean off dirt on the product ports.

13. 

Rest the product on a flat surface to avoid damage caused by the product falling over. 

      If the product is overturned and severely damaged, turn it off immediately, place the 
      battery in an open area, keep it away from combustible matter and people, and dispose of 
      it in accordance with local laws and regulations.

14. 

Ensure that the product is kept out of reach of children and pets.

15. 

The smart extra battery can only be connected to the host, and the smart extra battery 

      cannot be connected to each other.

3

Summary of Contents for DBS2300Plus

































Reviews: