15
The product supports EPS. When you connect the grid power to the AC Input Port of the
product through an AC cable, you can power electrical devices through the AC Output Port
(AC power will come from the grid and not the power station in this situation). In case of a
sudden blackout, the product can automatically switch to the battery powered supply mode
within 15ms. As a basic UPS function, this function does not support 0ms switching. Please do
not connect the product to any device that requires 0ms UPS, such as data servers and
workstations. Please test and confirm the compatibility before using the product. We
recommend that you only charge one device at a time and avoid using multiple devices at the
same time to avoid overload protection. Dabbsson takes no responsibilities for any device
failures or data losses caused by failures to follow instructions.(When the AC output load is
greater than the input load, only the battery can be used for power supply. Only when the AC
output load is less than the input load, can it be charged while discharging.)
Emergency Power Supply (EPS)
12V ON/OFF
FAST CHARGE
PD 100W
10A
30A
4A
DEVICE
IOT RESET
LIGHT ON/OFF
USB ON/OFF
5V 2.4A
PD 30W
AC NO/OFF
4.4 Parallel Connection Function
DBS2300 supports the parallel function, which can increase the output power and expand the
battery capacity. Using our special junction box and connecting wires, two products can be
connected, and the output power will be increased to 4000W, and the battery capacity will be
expanded to 4660Wh. At the same time, this product also supports parallel operation, two
products are respectively connected to two DBS3000B and powered on
(2*DBS24*DBS3000B), at this time the battery can be expanded to 16660Wh. You can
use this product as a home backup power station in case of a power outage.
Reminder:
The parallel junction box and connecting wires need to be purchased separately;
for detailed parameters, please refer to the manual of the parallel box.
