4.3 Charging Your Devices
After turning on the main power button, short press
the 12V DC power button to use the 12V DC output
port. Press the button again will turn it off. When the
12V DC power button is turned on, the product does
not automatically turn off.
P-Boost
With Dabbsson P-Boost technology, the product can power a 3000W Max device while the
rated output power remains 2200W, avoiding operation failure due to overload protection.
P-Boost Tips
1.
P-Boost is not available when the AC output is turned on in a recharging state.
2.
P-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with
strict voltage requirements and a rated power over 2200W. Appliances with voltage
protection (such as precise instruments) are not supported. P-Boost mode is more suitable
for heating devices. Please conduct your own tests with your devices with P-Boost enabled.
12V DC Output Port
Short Press
12V DC Power Button
12V ON/OFF
FAST CHARGE
PD 100W
10A
30A
4A
DEVICE
IOT RESET
LIGHT ON/OFF
USB ON/OFF
5V 2.4A
PD 30W
AC Output Port
After turning on the main power button, short press
the AC power button to use the AC output port. Press
the button again will turn it off. The default standby
time for the AC output port is 12 hours.
The AC power will be automatically turned off if no
load access for 12 hours. When the product is not in
use, turn off the AC power button to save power.
AC NO/OFF
Short Press
AC Power Button
13
AC NO/OFF