background image

27

1. 

Ideally,you should use and store the product at an ambient temperature between 20℃-30℃ 

    (68℉-86℉), and always keep it away from water, intense heat, and sharp objects. Do not 
    store in temperatures above 45℃ (113℉) or below -10℃ (14℉) for an extended period.

2. 

Storing a battery with a low charge for a long period shortens its lifespan. DBS1300 mitigates 

    the damage by putting the battery into hibernation mode. To get the most out of the battery, 
    make sure it is at about 60% before putting DBS1300 into long-term storage. While in storage, 
    it is recommended to discharge the battery to 30% and recharge it back to 60% every three 
    months.

8. What’s in the Box

9. Storage & Maintenance

DBS1300

AC Charging Cable

Warning Card

Car Charging Cable

Warranty Card

User Manual

Solar Charging Cable

MC4 female

Before connecting the solar panel, make sure that the positive pole of the solar 
panel is connected to the MC4 male connector and the negative pole is connected 

to the MC4 female connector (as shown in the figure below).

MC4 male

MC4 Port

Connect your solar panel to the Dabbsson solar panel charging cable 
(MC4 to XT60)

Please connect the positive pole to the MC4 
male connector and the negative pole to the 
MC4 female connector.  

Positive pole

+

Negative pole

2

1

3

Please connect the positive pole of the solar panel to the MC4 male 
connector and the negative pole to the MC4 female connector.  

Please confirm the positive and negative poles of your solar panel.

For users who use universal solar panels with non-MC4 connectors to power the 

device, please note solar panels should be within voltage and current range 

(please find more information on requirements in the user guide). 

Improper connection of MC4 connector to your device could damage the device. 

Dabbsson does not take responsibility for equipment failure due to personal 

misoperation.

DIY Instructions for

Non-MC4 Connector Solar Panels

Dabbsson solar panel

charging cable

US: [email protected]   

EU: [email protected]

Have any question? Chat with a specialist today.

 If you have any question, please do not hesitate to contact us.

Follow Us

Activate your warranty at 

www.dabbsson.com

Warranty Activation

Keep the original packaging & accessories

CLAIM YOUR WARRANTY

24-MONTH

WARRANTY

Fill in Your Information

Register Porduct

Products must be returned in their original condition and 

packaging with all included accessories for the warranty to be valid.

@Dabbsson_Global
@DabbssonOfficial
@Dabbsson_Official

+1 888 850 9503    Mon-Fri 9am-5pm (PST)

Summary of Contents for DBS1300
































Reviews: