4.3 Charging Your Devices
After turning on the main power button, short press
the 12V DC power button to use the 12V DC output
port. Press the button again will turn it off. When the
12V DC power button is turned on, the product does
not automatically turn off.
P-Boost
With Dabbsson P-Boost technology, the product can power a 1600W Max device while the
rated output power remains 1200W, avoiding operation failure due to overload protection.
P-Boost Tips
1.
P-Boost is not available when the AC output is turned on in a recharging state.
2.
P-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with
strict voltage requirements and a rated power over 1200W. Appliances with voltage
protection (such as precise instruments) are not supported. P-Boost mode is more suitable
for heating devices. Please conduct your own tests with your devices with P-Boost enabled.
12V DC Output Port
Short Press
12V DC Power Button
AC Output Port
After turning on the main power button, short press
the AC power button to use the AC output port. Press
the button again will turn it off.
When there is no load on the AC output port of this
product, the power will be automatically turned off
after 2 hours. In ECO mode, the AC output load is less
than 5W, the AC switch will be automatically turned off
after 12 hours, and the power will be turned off after 2
hours. In STANDBY mode, you can set the current
output time. When you don’t need it, please turn it off
in time to save power.
Short Press
AC Power Button
13