ENGLISH
51
Pump exchange mode
Water flow rate estimation
Auxiliary functions
Consumption and statistics
Device configuration
System
A description of each individual page follows.
Once you reach the last section of a menu page, use the key to navigate backwards to the main menu.
Error and Alarm Log
The alarm log is easily accessible in the list of pages in the main menu, immediately above the "Overview"
menu page. This page shows the event history starting with the most recent one recorded by the system.
In the event of system and/or pump problems, check the information pop-up on the display and follow the step-
by-step instructions.
The system provides a total of three types of alerts, in order of severity:
Warning
Error
Danger
It detects a malfunction in the
system or pumps, but this does not
prevent operation.
(E.g. Overflow)
It detects a malfunction that
prevents the system or pumps
from operating normally.
(E.g. Overcurrent)
It detects a critical issue in the
system or pumps, which blocks
their normal operation. In this
condition it is suggested not to
touch the devices and to contact
Customer Service.
Pop-up Warnings and Alarms
From the list of events it is possible to view their description.
This allows you to understand the cause and the next action to be taken
to remedy the fault.
The same section Error and Alarm Log, offers the possibility of resetting
the list of errors recorded up to that moment. This operation requires
confirmation in order to continue.
Pump status
The screen shows the operating status of the pumps in the system.
When you access the menu page, the following options are shown:
-
Manual Control: press and hold the key to activate pump 1, press
and hold the key to activate pump 2, press and hold the key to
activate both pumps.
